Update Samsung Galaxy S II S2 firmware to Gingerbread 2.3.5 | Singapore firmware | IT Tutorial

Finally, I have my Singapore local set, Samsung Galaxy S II updated with the official firmware from Samsung. Rather than waiting for the official roll out of the firmware via Kies, I have obtained the packaged version and updated my set to the new Gingerbread 2.3.5 version. Below is the full instructions for the firmware upgrade.

Gingerbread 2.3.5

These are the files which you will need:

a) Samsung USB Drivers
b) I9100XXKI3.rar (specify the Password – samfirmware.com)

Phase 1- Preparation

1) Install the Samsung USB drivers

1

2

3

4

2) Unzip the main firmware file which will contain 5 files

CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5,

GT-I9100-CSC-MULTI-OXAKI3.tar.md5

MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5

Odin3 v1.83.exe

u1_02_20110310_emmc_EXT4.pit

3) Run Odin3 v1.85.exe file

1

4) Power off your Galaxy S2

 

Phase 2 – Upgrading and Updating

5) Hold Volume down key+ Home button key and press power on

IMG 1042

6) Phone in download mode

IMG 1043

7) Connect your phone with USB cable. and you should get the message “Added! !” under the Odin’s message box in the bottom left.

8) In the Odin application, check only Re partition, Auto reboot & F. Reset time in option

IMG 1044

9) Specify files in Odin:

PIT = u1_02_20110310_emmc_EXT4.pit,

PDA = CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5,

PHONE= MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5,

CSC = GT-I9100-CSC-MULTI-OXAKI3.tar.md5

10) Hit the start button and process will begin

 

IMG 1046

IMG 1047

IMG 1050

11) Wait until your phone gets restart and then unplug the cable

IMG 1052

IMG 1053

Now your Samsung Galaxy S2 will be updated to I9100XXKI3 Android 2.3.5.

 

 

Special notes:

– Take Backup of your contacts messages and other data from your phone

– This procedure doesn`t format your internal memory. But messages, contacts and apps WILL be erased

– Shut down Samsung Kies completely prior the start of the upgrade

– This is not a root process and thus the warranty is not voided

Disclaimer : This post is for education purposes and although this process is tested to be successful on a Samsung S II, you may proceed with the steps at your own risks.

Read other related posts:

 

 

Follow us on:
Facebooktwitterinstagram

Share this article on:
Facebooktwitterredditpinterestlinkedinmail

Facebook comments:

  9 comments for “Update Samsung Galaxy S II S2 firmware to Gingerbread 2.3.5 | Singapore firmware | IT Tutorial

Leave a Reply

Your email address will not be published. Required fields are marked *